Old-Fashioned Peanut Brittle (2024)

Please note that this post may contain affiliate links.

Jump to Recipe Print Recipe

Old-Fashioned Peanut Brittle (1)

My mother has a large square of rose-colored marble for making such as brittle and butterscotch on her kitchen counter. Most likely Etowah marble from North Georgia, it has been in the family for years and originally belonged to my great-great-grandmother, Victoria Virginia Wingate. The sheen of the marble is a dull from age – or perhaps the amount of butter that it has absorbed in the past century — and it’s still absolutely beautiful. Mama has used it for as long as I can remember to make old-fashioned peanut brittle, as did my grandmother, before her and her grandmother, as well. I love the history in that this simple kitchen tool has brought so love and joy into my family’s home for generations.

Old-Fashioned Peanut Brittle (2)

Why is Marble Used for Candy-Making?

Natural stone such as marble is an ideal work surface for producing candy such as peanut brittle because it retains heat during the cooling process. Stone has excellent insulating properties and when making candy, the cooling phase is critical. Cooling down too quickly can prevent the candy from becoming hard. When candy cools slowly on a stone slab, more crystals have a chance to form. With a higher number of micro-crystals, the sugar has more sites on which to crystallize, and so crystallization ultimately happens faster. Having said all of that — if you don’t have a piece of stone, you can used a buttered rimmed baking sheet or one lined with a nonstick silicone baking sheet.

Old-Fashioned Peanut Brittle (3)

Holiday Traditions

Peanut brittle is as much a part of holidays as the Christmas tree in our family. In fact, we often decorate the tree the day after Thanksgiving and make peanut brittle, too. It was my grandfather’s favorite holiday treat. The Southern sweet tooth reigns in supreme glory during the holidays. Divinity, fudge, mints, melt-aways, cookies, cakes, and pies all have their place, but peanut brittle is what my family loves most.

Old-Fashioned Peanut Brittle (4)

Sweet Memories

During the holidays on an afternoon when the weather is clear, Mama pulls out her ancient candy thermometer. (It has to be a sunny day as sugar is hygroscopic, which means it attracts water. This also means making brittle, candy, divinity, and meringues can be notoriously difficult when it rains.)

The candy thermometer was originally my grandmother’s. It’s from the 1950s and is still stored in its original box, which is tattered and held together with tape. She then butters the marble slab, measures out her ingredients, and makes peanut brittle in a large heavy-bottomed saucepan. The aroma of sugar cooking, nuts toasting, and warm butter fills the air. Once the candy hits the right temperature she pours it out and flattens the molten mass with a buttered spatula.

If you don’t have a candy thermometer, you can use a reliable heatproof thermometer that goes up to 350F or so. Or, you can also do dribble some of the cold sugar into ice water. The sugar will react appropriately for the stage it has reached.

Old-Fashioned Peanut Brittle (5)

Stages of Cooking Sugar

That last sentence terrified a lot of people. Folks are terrified of making brittle, candy thermometer or not. Other than simply avoid getting burned, the key to sugar work is temperature. The final texture of candy depends on the sugar concentration. As the syrup boils the water evaporates, the sugar concentration increases, and the boiling point rises. A given temperature corresponds to a particular sugar concentration.

The stage refers to the reaction of spoonful of sugar syrup that has been drizzled into ice cold water. Peanut brittle has to reach the hard-ball stage, which means that strands of sugar break easily and feel dry, not sticky. To understand, let’s walk through the stages of cooking sugar.

Thread Stage – 230°F to 235°F

At this relatively low temperature, there is still a lot of water left in the syrup. When you drop a little of this syrup into cold water to cool, it forms a liquid thread that will not ball up, but simply dissolves in the water. Cooking sugar to this stage simply produces syrup, not candy.

Soft-Ball Stage – 232°F to 240°F

At this temperature, sugar syrup dropped into cold water will form a soft, flexible ball. Fudge, classic pralines, and fondant are made by cooking sugar to the soft-ball stage.

Firm-Ball Stage – 242°F to 250°F

Drizzle a little of this syrup in cold water and it will form a firm ball, that will retain it’s shape when you take it out of the water, but remains pliable and will flatten when squeezed between your fingers. Caramels are cooked to the firm-ball stage.

Hard-Ball Stage – 250°F to 268°F

At this stage, the syrup will form thick threads as it drips from the spoon. Very little water remains and the sugar concentration is rather high. The syrup drizzled into cold water will form a hard ball. If you take the ball out of the water, it won’t flatten, but you can still change its shape by squashing it. Nut brittles, nougat, marshmallows, and divinity are cooked to the hard-ball stage.

Soft-Crack Stage – 270°F to 290°F

As the syrup reached soft-crack stage, the bubbles on top will become smaller and closer together. When you drop a bit of this syrup into cold water, it will solidify into threads that, when removed from the water, are flexible, not brittle. They will bend slightly before cracking and breaking. Butterscotch is cooked to the soft-crack stage.

Hard-Crack Stage – 300°F to 310°F

The hard-crack stage is the highest temperature before caramel. If you spoon a little of the molten syrup in cold water and it will form hard, brittle threads that crack and break when bent. Toffee and lollipops are cooked to the hard-crack stage.

Caramel – 330° – 350° F

At the lower end of the temperature range of caramel all the water has boiled away and the pure sugar is liquid and light amber in color. As the temperature rises the sugar becomes richer and darker. Caramelized sugar is used for spun sugar and can also be used to give a candy coating to nuts. Above 350° caramel tastes burnt and bitter.

Old-Fashioned Peanut Brittle (6)

Hard Candy Christmas

I’ve always liked the glasslike thin threads of candy that are created as the spoon is pulled away from the brittle. They dissolve instantly when placed on the tongue, whispers of sweetness. While the candy is cooling we line a collection of tins with waxed paper. Some of the tins are new and somewhat stylish with Christmas motifs, some are years older, the familiar blue store-bought butter cookie tins, dinged and bent. The newer tins are used for holiday gift-giving and the well-used ones stay home. Once the candy is cooled completely she lifts it with a spatula and cracks it into individual pieces. As we nibble the bits and pieces of brittle, the antique marble slab is then wiped clean with warm soapy water and carefully dried. It’s set aside once again. We laugh and giggle, hang the ornaments, and yes, it’s Christmas.

Thanks for reading! I hope you and yours have a beautiful, safe holiday season.

Bon Appétit Y’all!
Virginia Willis

PS. Want a candy recipe that doesn’t involve lava-like sugar? Check out my Easy Peppermint Fudge!

Old-Fashioned Peanut Brittle (7)

Old-Fashioned Peanut Brittle (8)

Print Recipe

No ratings yet

Peanut Brittle Recipe

Prep Time10 minutes mins

Cook Time12 minutes mins

Cooling15 minutes mins

Total Time37 minutes mins

Course: candy, Dessert

Cuisine: American

Keyword: brittle, candy, christmas, holiday

Servings: 2 pounds

Calories:

Author: Virginia Willis

Equipment

  • candy thermometer

Ingredients

  • 2 cups sugar
  • 1 cup light corn syrup
  • ½ cup cold water, plus more for brushing the pan
  • Pinch of fine sea salt
  • 3 cups unsalted raw peanuts
  • 1 tablespoon unsalted butter, at room temperature, plus more for the marble or baking sheet
  • 1 teaspoon pure vanilla extract
  • 1 teaspoon baking soda

Instructions

  • Butter a rimmed baking sheet or marble slab, or line a rimmed baking sheet with a silicone baking liner.

    Old-Fashioned Peanut Brittle (9)

  • In a heavy saucepan, combine the sugar, corn syrup, water, and salt and bring to a boil over medium-high heat, stirring until sugar has dissolved. Continue cooking, without stirring, until the mixture reaches the hard-ball stage on a candy thermometer (250°F to 268°F) swirling the pan occasionally; wash down the sides of the pan with a pastry brush dipped in water to prevent crystals from forming. Depending on your pan and burner strength, this could take 8 to 15 minutes. Do not walk away! Stir in the nuts and continue cooking, stirring frequently to prevent the nuts from burning, until the mixture is light amber and the nuts are golden brown, about 5 minutes.

    Old-Fashioned Peanut Brittle (10)

  • Remove the pan from the heat; stir in the remaining 1 tablespoon butter and the vanilla. Carefully stir in the baking soda; the mixture will foam up in the pan. As soon as it is combined, pour it onto the prepared baking sheet or marble slab.

    Old-Fashioned Peanut Brittle (11)

  • Using an oiled offset spatula, quickly spread into an even layer about ½ inch thick. Slip the oiled spatula under the hot candy to loosen the edges and bottom. Let stand until completely cool, 45 to 60 minutes.

    Old-Fashioned Peanut Brittle (12)

  • Break the brittle into large pieces, and layer between pieces of waxed paper in an airtight container. Store at room temperature up to 1 month.

    Old-Fashioned Peanut Brittle (13)

Notes

Chef it Up: Chocolate-Dipped Nut Brittle Recipe

Line a baking sheet with waxed paper. Combine 6 ounces semisweet chocolate chips and 1 tablespoon vegetable shortening, in a microwave-safe bowl. Microwave, uncovered, on medium-high for about 1 minute. Remove and stir with a rubber spatula. Some chips may not have melted, so microwave again in 10-second intervals, stirring after each interval, until the chocolate and shortening are smooth and just melted. Let cool slightly. Dip the cooled brittle in the melted chocolate and shake off the excess. Sprinkle with additional chopped nuts, if desired. Place on the prepared baking sheet. Refrigerate until set.

If you are interested in hosting me for a speaking engagement, event, cooking class, or a book signing, let me know! Send an email to jona@virginiawillis.com and we’ll be back in touch as soon as possible.

Please be nice. Unauthorized use and/or duplication of this material without permission is prohibited. All photos and content are copyright protected. Please do not use photos without prior written permission. If you wish to republish this recipe, please rewrite the recipe in your own words and link back to this recipe onvirginiawillis.com. Thanks so much.

Let’s connect on Facebook,Twitter,Instagram, andPinterest!

Old-Fashioned Peanut Brittle (14)

Related

Please note that this post may contain affiliate links.

Good and Good for You with Virginia Willis is a lifestyle brand that shares health and wellness content through digital channels, events, and print media. For more information visit virginiawillis.com

Interested in an event or working together? Contact assistant@virginiawillis.com and we’ll be back in touch as soon as possible.

Please be nice. Unauthorized use or duplication is prohibited. All photos and content are copyright-protected. If you wish to republish this recipe, please link back to this recipe onvirginiawillis.com. Thanks so much!

Old-Fashioned Peanut Brittle (15)

Old-Fashioned Peanut Brittle (2024)

FAQs

Why didn't my homemade peanut brittle get hard? ›

The main reason why peanut brittle doesn't get hard and have the crunch we expect is because the sugar was not cooked long enough. The sugar needs to be cooked to what is called the hard crack stage, 300ºF.

Why do you add baking soda to peanut brittle? ›

Baking soda is also very important at this stage since it reacts to the heat, creating carbon dioxide that aerates the caramel, enabling it to snap when someone bites into it rather than requiring them to gnaw at it until it breaks or pulls apart.

Why did my peanut brittle not turn brown? ›

If your peanut brittle reached 311°F but is a pale milky color, it's likely the candy cooked too quickly. It reached the correct temperature but didn't cook long enough to undergo sufficient Maillard reactions and develop the characteristic brown color and rich, roasted flavor. Next time, cook at a lower temperature.

How to keep peanut brittle from getting sticky? ›

#5 - Overall, eliminate opportunities for moisture

Whether it's during the cooking, cooling, or storage process, moisture and humidity can ruin the best batch of brittle in minutes, leaving you with a soggy, sticky mess. This is why eliminating moisture anywhere you can is our top tip on how to store peanut brittle.

What makes brittle hard? ›

Just as in homemade syrup or caramel corn, baking soda causes a unique chemical reaction (basically a lot of rising foam) that is crucial in creating the right texture in peanut brittle. If you make it without baking soda but you will notice the brittle is a bit harder to bite through.

How do you salvage soft peanut brittle? ›

Put it in a pan on low heat and very slowly melt it. Once it begins to melt you can increase the heat a bit. The trick to this is that you have to stir it constantly in order to keep the peanuts from burning. You're going to want to bring it back to 300F, then immediately pour into the prepared pan.

Why do people put co*ke in peanuts? ›

History. The combination is believed to have developed in the South during the 1920s, as a snack for blue-collar workers that did not require them to wash their hands. It quickly became popular as a summer snack, especially in rural areas. The snack became an internet trend in 2018.

Why do you put water in peanut brittle? ›

Water: Water helps the sugar completely dissolve. Salt: A pinch of salt enhances the other flavors. If you opt for salted butter, you can skip this ingredient. Peanuts: Of course, you'll need peanuts for this classic treat!

Why is my peanut brittle so thick? ›

Not spreading the mixture thinly enough: If the peanut brittle is too thick (usually because you used too small of a pan), it may not cool and harden properly. Be sure to spread the mixture as thinly as possible in the pan. 4. Humidity: Humidity can affect the hardening process of the peanut brittle.

How can you tell when peanut brittle is done without a thermometer? ›

If you do NOT have a thermometer, here's what you do. Take a very small cup of cold water and drop a bit of the mixture in. If it dissolves into the water, it's not ready. Mine took 18 minutes to reach the correct temperature, so around 15 minutes start trying the water test.

Does weather affect making peanut brittle? ›

I've learned that brittle is better when made on a cool, dry day. When I've made the candy on a warmer, humid day, it tends to be a stickier brittle. This is because the brittle takes longer to cool, and it reaches a point where it is no longer evaporating moisture into the air.

Why is my peanut brittle bitter? ›

Those other liquid sugars have impurities that will burn at the higher temperature of making caramel, leading to a bitter-tasting brittle.

Why didn't my peanut brittle set? ›

Why didn't my homemade peanut brittle get hard? Same answer as the question above. If your peanut brittle is not hardening, it's because the sugar mixture did not get hot enough to properly caramelize, cool and become hard, crisp and crunchy.

Can you use parchment paper when making peanut brittle? ›

You will want the cookie sheet to be non-stick. Use parchment paper, a silicone baking sheet or a greased cookie sheet. Spread the peanut brittle as thin as you can. Immediately add your sea salt.

Can peanut brittle be too hard? ›

If your peanut brittle is too hard, it might have cooked too long and reached a temperature higher than the hard crack stage.

Why are my peanuts not getting soft? ›

Dried peanuts may require boiling up to 24 hours until they soften. If your water is hard, full of minerals, or you are boiling at high altitude, then your boiling times for dried peanuts may be greater than 24 hours.

How long does it take for brittle to harden? ›

How long does it take for peanut brittle to harden? This microwave peanut brittle starts to harden almost immediately once you finish cooking it and stirring in the baking soda. It will be completely hardened and ready to break into pieces in just 30 minutes.

Why did my peanut butter fudge not get hard? ›

Fudge Didn't Set

If your fudge turned out super sticky, or it didn't set as it cooled, it probably never got hot enough. This mistake is super easy to avoid if you use a candy thermometer and cook the fudge to the temperature specified in the recipe (usually between 234 and 239°F).

Top Articles
Latest Posts
Article information

Author: Kerri Lueilwitz

Last Updated:

Views: 6643

Rating: 4.7 / 5 (67 voted)

Reviews: 82% of readers found this page helpful

Author information

Name: Kerri Lueilwitz

Birthday: 1992-10-31

Address: Suite 878 3699 Chantelle Roads, Colebury, NC 68599

Phone: +6111989609516

Job: Chief Farming Manager

Hobby: Mycology, Stone skipping, Dowsing, Whittling, Taxidermy, Sand art, Roller skating

Introduction: My name is Kerri Lueilwitz, I am a courageous, gentle, quaint, thankful, outstanding, brave, vast person who loves writing and wants to share my knowledge and understanding with you.